ad blue Citroen DS3 2014 1.G Owner's Manual

DS3_en_Chap00a_sommaire_ed01-2014
cHEcKS
PR A
cT
IcA
L
INFORMATION TEcH
NIcA L dA TAAUdI O ANd
T ELEMATI
c
S
190 Fuel  tank
192 M isfuel prevention (Diesel)
193
 R

unning   out   of   fuel   (Diesel)
194
a

d
blu
e
® additive and SCR
system
 
(BlueHDi   Diesel)
202
 T

emporary   puncture   repair  
k

it
207
 C

hanging   a   wheel
214
S

now chains
215
 C

hanging
 a bu
lb
224
 C

hanging
 a f
use
231


b
at

tery
234
 E

nergy
 
economy   mode
235
 C

hanging   a   wiper   blade
236
 T

owing
 
the   vehicle
238
 T

owing
 
a   trailer
240


a
d

vice on care and
maintenance
242
ac

cessories 247
bo

nnet
249
 Pe
trol   engines
250 D iesel eng ines
251 C hecking   levels
255
 C

hecks 260
 Pe

trol   engines
263
 Pe
trol   weights
266 LP G e ngine
267 L PG   weights
268
 D

iesel
 eng
ines
270
 D

iesel
 eng
ines
272
 D

imensions
2 74
 I

dentification
 ma
rkings279
 E

mergency   or   assistance
281

eMyWay
335 A udio   system
0120130100 11

15
DS3_en_Chap00c_eco-conduite_ed01-2014
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the bottom   of   the   boot,   as   close   as   possible   to   the   rear   seats.
Limit
  the   loads   carried   in   the   vehicle   and   reduce   wind   resistance   (roof  
b

ars,   roof   rack,   bicycle   carrier,   trailer...).   Use   a   roof   box   in   preference.
Remove
  roof   bars   and   roof   racks   after   use.
At
  the   end   of   winter,   remove   snow   tyres   and   refit   your   summer   tyres.
Observe the recommendations on
maintenance
Check the tyre pressures regularly, when cold, referring to the label in the   door   aperture,   driver's   side.
Carry
  out   this   check   in   particular:
-
 
b
efore   a   long   journey,
-
 
a
t   each   change   of   season,
-
 
a
fter   a   long   period   out   of   use.
Don't
  forget   the   spare   wheel   and   the   tyres   on   any   trailer   or   caravan.
Have
  your   vehicle   serviced   regularly   (engine   oil,   oil   filter,   air   filter,  
p

assenger   compartment   filter...)   and   observe   the   schedule   of  
o

perations   recommended   in   the   maintenance   and   warranty   guide.
With
  a   Blue   HDi   Diesel   engine,   if   the   SCR   system   is   faulty   your   vehicle  
b

ecomes   polluting;   go   to   a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout   delay   to   have   the   emissions   of   nitrous   oxides   brought   back   to  
t

he   legal   level.
When
  refuelling,   do   not   continue   after   the   third   cut-off   of   the   nozzle   to  
a

void   any   over flow.
At
  the   wheel   of   your   new   vehicle,   it   is   only   after   the   first   1   800   miles  
(3
  000   kilometres)   that   you   will   see   the   fuel   consumption   settle   down   to  
a

  consistent   average.
Eco-driving

33
DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
AdBlue
® additive
(BlueH
d i d iesel) fixed,
  on   switching o
n   the   ignition, a

ccompanied   by   an
 a

udible   signal   and   a
 m

essage   indicating   the
 r

emaining
 d
riving
 r
ange.The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1

500   miles   (2400   km).Have the
adbl ue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   dealer   CITROËN   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding   section.
+ flashing
 
associated
 
with
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 
a
 m

essage
 
indicating
 
the
 r

emaining
 d

riving
 r

ange. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
375
 
miles
 
(600
 
km). You
 
must
 
top-up the a d
blu
e
® additive tank to avoid
a
breakdown :
 
go
 
to
 
a
 
dealer
 
CITROËN   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding
  section.
flashing,
 as

sociated
 w

ith the SERVICE
warning
 lam

p,
 a

ccompanied
 
by
 
an
 a

udible
 
signal
 
and
 
a
 m

essage
 
indicating
 
that
 s

tarting
 
is
 
prevented. The
a
d
blu

e
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the a
dblu e® additive tank: go to a dealer CITROËN or a q
ualified   workshop,   or   carry   out   this   operation   yourself  
b

y
 
referring   to   the   corresponding   section.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
tank.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
+
+ S
cR e

missions
control system
(BlueH
d i d iesel)fixed,
  on   switching   on   the
 i

gnition,   associated   with
 t

he   SERVICE   and   engine
 d

iagnostic
 w
arning
 lam
ps,
 a

ccompanied   by   an   audible
 s

ignal   and   a   message   indicating
 a

n   emissions   control   fault.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust  
e

missions   return   to   normal   levels.
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating
 t
he
 r
emaining
 d

riving
 r
ange.The
  remaining   driving   range   is  
b

etween   0   and   650   miles   (1   100   km).Contact a CITR
oË

N dealer or a qualified
workshop
  without delay, to avoid a
breakdown .
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating   that   starting   is  
p

revented. You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must
call on a CITR
oË

N dealer or a qualified
workshop.

DS3_en_Chap02_ecrans-multifonction_ed01-2014
Display configuration
Once this menu has been selected, you can gain   access   to   the   following   settings:
-
 b

rightness-video
 s
etting,
-
 
d
ate   and   time   setting,
-
 
s
election   of   units.
Once
  the   fuel   consumption   units   have  
b

een   changed   to   mpg,   the   information  
i

n   the   screen   relating   to   speed   and  
d

istance   also   changes   to   mph   and  
mil

es
 re
spectively. For
 

safety
 
reasons,
 
configuration
 
by
 
the
 d

river   of   the   multifunction   screen   must  
o

nly   be   done   when   stationary.
choice of language
Once this menu has been selected, you can change   the   language   used   by   the   screen   by  
c

hoosing   one   from   a   defined   list.With
  Audio   system   on,   once   this   menu   is  s
elected   you   can   configure   your   Bluetooth  h
ands-free   system   (pairing),   view   the   various  
t

elephone   directories   (list   of   calls,   services...)  
a

nd   manage   your   calls   (call,   hang   up,   second  
c

all,   secret   mode...).
For
  more   information   on   the   "Telephone"  
f

unction,   refer   to   the   "Audio   system"   section.
"Telephone" Menu
Setting the date and time
F Sel ect the " Set date and time" function
using
  the   "5 " or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
A
djust   the   settings   one   by   one   using  
the " 7" or " 8"
  button   then   confirm  
with "OK" .
F

T
hen select the "OK"
 
box   in   the   screen  
a

nd   confirm.

87
DS3_en_Chap04_confort_ed01-2014
The heating / ventilation or air conditioning systems operates with the engine running, as well as in STOP mode with Stop & Start.
1. Temperature adjustment
F Turn  the   dial   from   blue  (
cold)   to   red   (hot)   to   adjust  
t

he   temperature   to   your  
r

equirements.
2. Air flow adjustment
F Turn   the   dial   from   position   1
to position 5 to obtain a
comfortable
  air   flow.
F

I

f you place the air flow control
in position 0 (deactivation of the
system),
  the   temperature   is   no  
l

onger   maintained   at   a   comfortable  
l

evel.   However,   a   slight   flow   of   air,  
d

ue  
t
o  
t
he  
m
ovement  
o
f  
t
he  
v
ehicle,  
c

an   still   be   felt.
3. Air distribution adjustment
Windscreen and side windows.
W indscreen, side windows and
footwells.
Footwells.
Central
  and   side   vents.
The air distribution can be
adapted
  by   placing   the   dial  
i

n   an   intermediate   position.
4. Air intake / Air recirculation
The intake of exterior air avoids the formation of   mist   on   the   windscreen   and   side   windows.
The recirculation of interior air insulates the
passenger
  compartment   from   exterior   odours  
a

nd   smoke.
Return
  to   exterior   air   intake   as   soon   as   possible  
t

o prevent deterioration of the air quality and
the
  formation   of   mist.
Manual control panel F
 
M
ove   the   manual   control   to  
t

he   left   to   be   in   the   "recycling  
i

nterior   air"   position.
F
 
M
ove   the   manual   control   to   the  
r

ight   to   return   to   the   "fresh   air  
i

ntake"   position.
comfort

91
DS3_en_Chap04_confort_ed01-2014
It is possible to adjust one or more functions manually   while   leaving   the   other   functions   in  
a

utomatic   mode.
The "AUTO"
 

symbol   switches   off.
To
  return   to   automatic   mode,   press  
the "AUTO"
 

button.
Manual override
4. Air conditioning on/off
For maximum cooling or heating of the cabin,   it   is   possible   to   go   beyond   the  
m

inimum   14   or   maximum   28   values.
F

P
ress the blue button 2 until "LO"
is displayed or the red button 2
until
"HI"
 
is   displayed. Press this button to switch off the air
conditioning.
Stopping
  the   air   conditioning   may   cause
 s

ome   problems   (humidity,   misting).
Automatic   operation   of   the   air   conditioning   is  
r

esumed  
w
hen  
t
he  
b
utton  
i
s  
p
ressed  
a
gain.  
T
he  
s

ymbol
 "A
/
c" 
is   displayed.
5. Air intake / Air recirculation
Press this button for recirculation of
the
  interior   air.   The   air   recirculation  
s

ymbol
 5
  is   displayed.
air

recirculation enables the
passenger
  compartment   to   be   isolated   from  
e

xterior
 
odours   and   smoke.
Press
 
this
  button   again   or   press   the   "AUTO"
button
 
to
 
resume   automatic   management   of  
t

he
 
intake
  of   air.   The   air   recirculation   symbol   5
goes
 
off. Avoid
  prolonged   recirculation   of  
i

nterior   air   (risk   of   condensation   or  
d

eterioration   of   the   air   quality).
Switching
 
to
 
manual
 
mode
 
may
 
not
 
be
 
s

uitable
 
(temperature,
 
humidity,
 
odour,
 
c

ondensation) and does not provide
optimum
 c

omfort.
comfort

DS3_en_Chap06_conduite_ed01-2014
Reversing camera
The reversing camera cannot in any c
ircumstances   be   a   substitute   for  
v

igilance   on   the   part   of   the   driver. Clean
  the   reversing   camera   regularly  
u

sing   a   soft,   dry   cloth.
A
 
reversing   camera   is   activated   automatically  
w

hen
 r
everse
 g
ear
 i
s
 enga
ged.
The
 
colour   image   is   provided   in   the   navigation  
sc

reen. The space between the blue lines represents the
width   of   your   vehicle   except   for   the   door   mirrors.
The   blue   lines   represent   the   general   direction  o
f   the   vehicle.
The red line represents a distance of about
30
  cm   beyond   the   edge   of   your   vehicle's  
r

ear   bumper.   The   audible   signal   becomes  
c

ontinuous   from   this   limit.
The
  green   lines   represent   distances   of   about  
1
  and   2   metres   beyond   the   edge   of   your  
v

ehicle's   rear   bumper.

193
DS3_en_Chap10_info-pratiques_ed01-2014
Running out of fuel (Diesel)If your vehicle is fitted with an HDI engine, the fuel system must be primed if you run out of fuel.
T his   system   consists   of   a   priming   pump   and   a   transparent   pipe   under   the   bonnet.
F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F
 
O
pen   the   bonnet.
F
 
D
epending   on   version,   unclip   the   cover   to  
g

ain   access   to   the   priming   pump.
F
 
S
queeze   and   release   the   priming   pump  
u

ntil   resistance   is   felt   (could   be   from   the  
f

irst application) and fuel appears in the
transparent
  pipe   with   the   green   connector.
F
 
O
perate   the   starter   until   the   engine   starts.
F
 
D
epending   on   version,   put   the   cover   back  
i

n   position   and   clip   it   in   place.
F
 
C
lose   the   bonnet.
BlueHdi 100 engines
F Fill  the   fuel   tank   with   at   least   five   litres   of  D
iesel.
F
 
S
witch   on   the   ignition   (without   starting   the  
e

ngine).
F

W
ait around 6 seconds and switch off the
ignition.
F
 
R
epeat   the   operation   10   times.
F
 
O
perate   the   starter   to   run   the   engine.
If
 
the
 
engine
 
does
 
not
 
start
 
at
 
the
 
first
 
a

ttempt,
 
do
 
not
 
try
 
again.
Operate
 
the
 
priming
 
pump
 
again,
 
then
 
t

he
 
starter.
Practical information

DS3_en_Chap10_info-pratiques_ed01-2014
adblue® additive and SCR system
f
or
 
Blue
  HDi   Diesel   engines
To assure respect for the environment and c
onformity   with   the   new   Euro   6   emissions  
s

tandard,   without   adversely   affecting   the  
p

er formance   or   fuel   consumption   of   Diesel  
e

ngines,   CITROËN   has   taken   the   decision   to  
e

quip   its   vehicles   with   an   effective   system   that  
a

ssociates SCR (Selective Catalytic Reduction)
with
  a   particle   filter   (FAP)   for   the   treatment   of  
e

xhaust   gases.
Presentation of the ScR s ystem
Using an additive called AdBlue® containing u
rea, a catalytic converter turns up to
85% of
 
nitrous
 
oxides
 
(NOx)
 
into
  nitrogen  
a

nd
 
water,
 
which
 
are
 
harmless
 
to   health   and  
t

he environment. The
a d
blu
e
® additive is held in a special
tank
 
located
  under   the   boot   at   the   rear   of  
t

he
 
vehicle.
 
It   has   a   capacity   of   17   litres:   this  
p

rovides
 
a
 
driving   range   of   about   12   500   miles  
(

20
 
000
 
km),
  after   which   an   alert   is   triggered  
w

arning
 
you
 
when   the   reserve   remaining   is  
e

nough
 
for
 
just   1   500   miles   (2   400   km).
During
 
each
  scheduled   service   of   your   vehicle  
b

y
 
a
 
CITROËN   dealer   or   a   qualified   workshop,  
t

he
a
d
blu

e
® additive tank is refilled in order to a
llow
 
normal   operation   of   the   SCR   system.
If
 
the
 
estimated   mileage   between   two   services  
i

s
 
greater
 
than   12   500   miles   (20   000   km),   we  
r

ecommend
  that   you   go   to   a   CITROËN   dealer  
o

r
 
a
 
qualified   workshop   to   have   the   necessary  
t

op-up
 
carried   out.
on
ce the a
dbl
ue
® tank is empty, a
 
system
 
required
  by   regulations  
p

revents
 
starting
 
of   the   engine.
If the SCR

is faulty, the level of
emissions
 
from
 
your   vehicle   will   no  
l

onger
 
meet
 
the
 
Euro   6   standard:   you  
v

ehicle
 
becomes
 
polluting.
In
 
the
 
event
 
of
 
a
 
confirmed   fault  
w

ith
 
the
 
SCR
 
system,   you   must   go  
t

o a CITR
oË

N dealer or a qualified
workshop
 
as
 
soon   as   possible:   after  
a

 
running
 
distance   of   650   miles  
(

1 100
 
km),
 
a
 
system   will   be   triggered  
a

utomatically
 
to
 
prevent   engine  
s

tarting.